安徽艾约塔硅油有限公司
Hits: 527 img
10: 1 two-component liquid silicone rubber is an addition type non-toxic and tasteless transparent liquid silicone mold rubber, the product has a high transparency after curing, high tear resistance, almost no shrinkage, Good stability, good mold release, no deformation and so on. It is an elastic mold material for filled with AB water, PU, epoxy resin, 815 resin, Polly resin, PT, ABS material and so on.
Product technical data
|
Item number |
Color |
Hardness(A) |
Viscosity(cps) |
Tear strength(KN/m) |
Tensile strength (Mpa) |
Elongation (%) |
Mixing time(Min) |
|
IOTA- 1310 |
High transparent |
10±2 |
25000±5000 |
≥4 |
2.88 |
≥500 |
60±10 |
|
IOTA- 1320 |
High transparent |
20±2 |
45000±5000 |
≥6 |
3.10 |
≥450 |
60±10 |
|
IOTA- 1330 |
High transparent |
30±2 |
65000±5000 |
≥9 |
4.15 |
≥350 |
60±10 |
|
IOTA- 1340 |
High transparent |
40±2 |
80000±5000 |
≥13 |
3.61 |
≥300 |
60±10 |
Products Procedure
1. Mixing: The A and B rubber 1: 1 weight ratio mix and stir evenly.
2. Discharge bulbs: For high requirements should be evacuated discharge bubbles, otherwise the mold will have bubbles.
3. Material pouring: pour the mixing the stirred liquid silicone into the mold box.
