Operation steps

1. New cars do not need to be polished. If there are scratches, please polish them first.

2. The vehicle is degreased and cleaned to ensure the dry surface of the body.

3. Take the crystal plating solution and pour it on the eyeglass cloth or professional sponge, and start to wipe on the surface of the car. It is suggested to use a cross wipe, that is, a horizontal wipe, a vertical wipe.

4. After finishing the wiping, use dry towel to start from the initial position of the wiping for leveling. In order to facilitate the construction, partial construction is recommended. If first do the front car cover, wipe the crystal solution after 1 minute with a dry towel, followed by the door, roof, tail construction.

5. After observing the flatness of car paint coating surface, the car shall be placed in a clean place for 2 hours and the construction shall be completed.