Phenyl Trimethicone (CAS 73559-47-4): INCI Name, Properties, and Uses in Cosmetics — Formats, Dose Ranges, Compliance Paperwork and Supply Conditions

Hits: 2832 img

Introduction

Whether a phenyl fluid earns a place in a formula depends on three things lining up: a clear job inside the format, a defensible dose, and paperwork that survives review. Phenyl Trimethicone has published material on all three fronts, but it is scattered across ingredient reviews, safety assessments and supplier documents. This article gathers it around IOTA 556 from Iota Silicone Oil (Anhui) Co., Ltd., so that application mapping, dose reference, family division of labour, compliance basis, technical documentation and supply conditions sit in one place.

1. Where the Material Is Used

The supplier lists its application directions as skin lotions and creams, suntan lotions and sprays, pre-shave lotions, and hair gloss use in sprays, conditioners and grooming aids, along with use as a water-repellent additive that lowers the tacky feel of organic ingredients.

Format Job it performs Reference dose range What to assess
Hair sprays, conditioners, grooming aids Gloss, combing, fewer tangles 2% to 5% Shine, tack after drying, weigh-down
Lotions and creams Emolliency, lower tack, easier spread 1% to 3% After-application shine, film uniformity, pilling
Lipsticks, eyeshadows, foundations Colour payoff, extension, less dryness 2% to 8% Colour behaviour, wear, pigment dispersion
Sunscreen lotions and sprays Filter dispersion, sensory relief 2% to 5% Uniformity, water resistance, re-measured factor

The dose ranges come from published guidance for IOTA’s cosmetic-grade phenyl family and are intended to set an initial window. A specific formula still needs adjustment for emulsifier system, oil-phase share and target feel, confirmed by stability data.

2. Registered Functions

Under the international nomenclature the material is registered against three functions.

Function How it works Where it shows up
Antifoaming Changes surface energy so foam stabilises less readily Less foam in manufacture and filling, lower foaming on shaking
Hair conditioning Deposits a continuous film on the fibre Higher apparent gloss, lower wet and dry combing work
Skin conditioning, occlusive Lays down a breathable film that slows water loss Comfort after application without a heavy sealed feel

These map cleanly onto the measured properties: antifoaming relates to surface energy, hair conditioning to refractive index, skin conditioning to film continuity.

3. Frequency of Use Across Categories

Ingredient databases publish how often a material appears across product categories, which is useful as a format signal.

Category Share of products containing it
Foundation About 22.88%
Concealer About 20.92%
Colour-correcting cream About 16.18%
Leave-in detangler About 13.51%
Tinted cream or gel About 13.29%
Cosmetics overall About 1.93%

Read this carefully. The numbers describe formulation practice, not efficacy, and they do not translate into market size. Their real value is directional: colour cosmetics and detangling formats adopt the material far more often than the category average, which points to gloss and spread as the pains being solved.

4. Division of Labour Within the Family

A single supplier offers several phenyl fluids separated by index and viscosity, and mixing them up moves the feel away from the design point.

Grade INCI name Viscosity (25°C) Refractive index (25°C) Specific gravity Reference dose Position
IOTA 556 Phenyl Trimethicone 22.5 mm²/s 1.46 0.980 1% to 8% by format Light gloss with reduced tack; sprays and airy emulsions
IOTA 56A Diphenylsiloxy Phenyl Trimethicone 15 mm²/s 1.498 0.995 0.1% to 30% Very low viscosity with high index; bright lip colour and hair oils
IOTA 54 Phenyl-substituted silicone fluid 400 mm²/s 1.50 1.07 Hair 2% to 5%, skin 1% to 3%, lipstick 3% to 8%, eyeshadow 2% to 5%, sunscreen 2% to 5% High index with cushioning; formats where residence matters

Two axes settle the choice. For brightness without residue, start from 556 or 56A. For brightness with cushioning, move to 54. All three are phenyl-substituted and all sit above the 1.390 to 1.410 band of all-methyl fluids.

5. Seven Moves From Brief to Locked Formula

  1. Name the target: raise shine, or cut tack. The two pull toward different viscosity bands.
  2. Set a control formula with no phenyl fluid.
  3. Pick an initial dose from the lower edge of the format range above.
  4. Increase one variable at a time — 1%, 2%, 3% — so emulsifier effects stay out of the reading.
  5. Complete stability work: thermal cycling, centrifuge, light exposure, plus low-temperature clarity for sprays.
  6. Score sensory results on spread, shine, tack after drying and weigh-down.
  7. Freeze the record: grade, dose, parameters and test results, ready for sourcing and substitution.

6. Safety Basis and Compliance Line

Item Published basis Effect on formulation and filing
Safety in use The Cosmetic Ingredient Review Expert Panel reconfirmed safe use as a cosmetic ingredient in 2006, examining concentrations between 0.0075% and 36%; a 2022 assessment covering phenyl-substituted methicones reached a conclusion of safe use as used in practice A dose inside the reviewed window can be supported by these publications in the safety file
Japan inventory IOTA documents listing in JSCI as Methylphenylpolysiloxane, code 104207, CLS categories 1-11 with no usage limit noted Verify current listings line by line when filing for that market
Organic certification Ingredient references note the material is not permitted under organic certification schemes A certified-organic line needs a different oil-phase design
Stated boundary IOTA records that the product is neither tested nor represented as suitable for medical or pharmaceutical use Claims and filings remain within cosmetics and personal care
Labelling Declarations must carry the INCI name Phenyl Trimethicone Trade names and local synonyms cannot stand in for it

7. Documentation and Incoming Testing

Document Purpose Content to expect
TDS Formula design Viscosity, refractive index, specific gravity, acid value, flash point, solubility
SDS Storage and handling Hazard classification, protective measures, spill response, incompatible materials
COA Batch release Lot number, test items with measured values, date of testing
Compliance statement Market filing Inventory status, use limits, supporting concentration ranges

Run five checks at intake: appearance, which should be a clear liquid free of mechanical impurities; then refractive index, viscosity, specific gravity and acid value. Refractive index does double duty here, confirming both the gloss capability and that the grade delivered has not been mixed.

8. Supply and Storage Conditions

Item Published condition for IOTA 556
Pack sizes 25 kg pails, 200 kg drums
Samples 250 g, for bench trials
Storage temperature At or below 25°C
Shelf life 30 months from production in the original unopened container
Transport Handled as non-hazardous goods
Compatibility note Does not tolerate strong acids or alkalis; store away from oxidisers
Equipment cleaning Solvent naphtha, xylene, toluene or ethyl acetate
Abnormality check Cloudiness without visible impurities suggests contamination from another oil; assess before use

Shelf life is tied to two conditions: unopened, and at or below 25°C. A practical plant rule is to log both receipt and opening dates by lot, then re-measure refractive index and viscosity after opening before release.

9. Market Direction

Dimension Published research summary Implication for sourcing
Scale Global market for the ingredient described in the several-billion-dollar range A mature volume material where supply continuity outweighs novelty
Growth Compound annual growth above 5% projected over the next five years Room for multi-year pricing and framework agreements
Drivers Rising demands on gloss and feel in premium skincare and colour cosmetics; hair categories wanting shine without weight The low-viscosity, high-index tier grows faster
Constraints Raw-material price swings and tightening regulatory frameworks by region Documentation completeness becomes a supplier screen

These figures come from third-party research summaries and are directional. Procurement decisions should rest on your own sales mix and formula plans.

10. Misconceptions Worth Correcting

Copying doses across formats

Published doses belong to a particular emulsifier system and oil-phase share. Three per cent behaves very differently in an alcohol spray and in a water-in-oil cream.

Reading adoption rates as dosing advice

A database percentage says how many products include the material, nothing about how much to add.

Changing index while ignoring viscosity

Gloss and residence are set jointly. Lifting index without matching viscosity yields shine that feels heavy, or lightness that looks flat.

Overlooking organic certification limits

The material is not permitted under organic schemes. A line carrying both conventional and certified products needs two oil-phase designs, not one shared formula.

Treating the reviewed concentration window as a recommended dose

That window describes the scope of safety review. The working level stays a matter of efficacy, stability and sensory results.

FAQ

What jobs does Phenyl Trimethicone perform in a formula?

Three registered functions: antifoaming, hair conditioning, and skin conditioning on the occlusive side. In practice that means less foam during manufacture and shaking, more sheen and easier combing on hair, and a breathable film that slows water loss on skin.

Where should dosing start?

Hair formats around 2% to 5%, skincare 1% to 3%, colour cosmetics 2% to 8%, sunscreen 2% to 5%, following published guidance for the IOTA cosmetic-grade family. Begin at the lower edge and step up one variable at a time. Sprays and light emulsions favour the lower-viscosity grades.

What is its advantage in alcohol-based systems?

The supplier documents ready solubility in 95% ethanol at room temperature and up to 50% by weight at temperatures as low as 4°C. That keeps alcohol sprays and setting products clear through cold distribution, limiting haze and precipitation.

Which documents does export filing require?

Typically four: TDS, SDS, COA and a compliance statement, plus inventory status for the destination market. For Japan, IOTA records listing under JSCI code 104207 with CLS categories 1-11 and no usage limit noted, though current listings should be re-verified at filing.

Can a certified-organic product use it?

Not for that positioning. Ingredient references record that the material is not permitted under organic certification schemes, so a certified line needs an alternative oil phase with fresh stability and sensory work.

How do I judge whether a delivered lot is usable?

Run the five intake checks: appearance should be a clear liquid without mechanical impurities, then measure refractive index, viscosity, specific gravity and acid value. If the liquid turns cloudy with no visible impurities, contamination by another oil is the usual explanation, so investigate the source before releasing or returning the lot.


Company note: Iota Silicone Oil (Anhui) Co., Ltd. supplies the full silicone chain, including phenyl methyl silicone oils, vacuum diffusion pump fluids, phenyl hydrogen-containing fluids, phenyl hydroxyl and phenyl vinyl fluids, phenyl silicone emulsions and cosmetic-grade phenyl fluids, serving cosmetics, personal care, electronics, textiles and leather, coatings, construction and optoelectronics, with sales into Southeast Asia, South America, Europe, North America, the Middle East and the domestic market.



Phenyl Methyl silicone oil IOTA 556 (Replacement for DC556)-IOTA

Online QQ Service, Click here

QQ Service

What's App